Home > HARDWARE > CONSTRUCTION HARDWARE > FOUNDATION HARDWARE
Choose a sub category:
ROD CHAIRS TIE WIRE / TOOLS ANCHOR BOLTS
CONCRETE PIER FORMS/CAPS FLOOR JACK POSTS FOUNDATION ACCESS DOORS
REBAR PINS/REBAR CAPS NAIL STAKES ADHESIVE ANCHORING
Sort By:
1 2 3
Acorn BT176-1C Bar Tie Marshalltown 14731 Manual Tie Wire Twister Mintcraft 16570 Rugged Wire Twister
Used to secure the position of rebar during concrete pouring. Safely and easily twists wire bar ties. Plastic handle. Rugged design. Compact size allows the tool to be used in tight space. Safely and easily twists wire bar ties. Hardwood handle, Ergonomic design.
Stanley 316489 Weldable Rebar Billy Penn 08212-25 Manual Bar Tie Twister Quik-Tube 6922-01 Building Form
Stanley Weldable Rebar, 1/2 in, NO 4 Nominal, 36 in Overall Length, Steel Makes tying fast and easy. Wood handle. Used by homeowners and residential contractors to create everything from lamp post and mailbox bases to deck supports. Easy-to-use cardboard tube, scaled-down version of rigid fiber forms that heavy-construction contractors use. Pour concrete in form, let it dry, then cut away form. Length can be cut down if needed.
Quikrete 6922-02 Concrete Quik-Tube Form Stanley 316497 Weldable Rebar Ad Tech T3438CK Mixing Nozzle Kit
Used by homeowners and residential contractors to create everything from lamp post and mailbox bases to deck supports. Easy-to-use cardboard tube, scaled-down version of rigid fiber forms that heavy-construction contractors use. Pour concrete in form, let it dry, then cut away form. Length can be cut down if needed. Stanley Weldable Rebar, 1/2 in, NO 4 Nominal, 72 in Overall Length, Steel, Used in Landscaping Nozzle kit for Ultrabond epoxy 22 oz. system.  Hi-Flow nozzles reduce waste while increasing flow. 15 inch length snaps off to 10 inches if required.  3/8 diameter at tip.  Built in mixing nut allows for fast and easy attachment to cartridge.
Quik-Tube 6922-03 Building Form FORM CONCRETE FOOT PLASTC 22IN Ultra Bond 1 A9-1 Anchoring Adhesive
Used by homeowners and residential contractors to create everything from lamp post and mailbox bases to deck supports. Easy-to-use cardboard tube, scaled-down version of rigid fiber forms that heavy-construction contractors use. Pour concrete in form, let it dry, then cut away form. Length can be cut down if needed. Fastest, easiest way to form concrete footings; patented square footing form decreases cycle time, labor and material cost; can be sized, attached to construction tube, placed in excavated hole and backfilled. Can be used with rebar to reinforce footing or column if needed. Use for anchoring and doweling. Long working time with a quick cure time. Moisture insensitive, can be used in underwater environments, concrete, hollow block, brick, clay and stone. Ideal for vertical, horizontal, and screen applications, seismic anchoring and bracing, surface crack repair. Ultra high-strength epoxy mixes through a static mixing tube and can also be resealed which means that any remaining material can be saved for later use. Cartridge w/nozzle.
Miraclebond 1350 A9-MB1350HN Anchoring Adhesive Marshall JP16 Adjustable Extend-O-Post Jackpost FORM CONCRETE FOOT PLASTC 28IN
Two component (1:1 ratio), 100-percent solids, high aspect ceramic blend, solvent-free, non-sag, high strength, high modulus, moisture insensitive epoxy system. Ideal for use as a bonding agent for almost any material, including metal, concrete, brick, wood, stone, block and other substrates. Can also be used for repairing holes, spalls, cracks in concrete, repairing rotted wood, installing and repairing anchor bolts or hand rails. LIMITATIONS: Minimum substrate and ambient temperature 40 degrees F (4.44 degrees C),  Cartridge with two nozzles; medium duty caulking tool required. Use for supporting sagging floors, weak beams and warping stairways. 2-1/4" x 15 gauge prime steel inner tubing. 2-1/2" x 15 gauge prime steel outer tubing. 2-1/4" steel collar. 1" x 6" steel screw. Two 4" x 4" x 10 gauge steel plates. 7" turning handle. Grooved pin and plain pin. Flow coated with red corrosion-resistant paint. Packed with instructions. UPC symbol on carton. Maximum load capacity obtained at lowest extension. Fastest, easiest way to form concrete footings; patented square footing form decreases cycle time, labor and material cost; can be sized, attached to construction tube, placed in excavated hole and backfilled. Can be used with rebar to reinforce footing or column if needed.
Marshalltown TWR26 Tie Wire Reel Ultra Bond 1300 A22-1300N Anchoring Adhesive Ultra Bond 1 A22-1 Anchoring Adhesive
Made of lightweight durable plastic to give many years of trouble free use. Fits any standard size belt. Accomodates all types of tie wire. Two  component (1:1 ratio), 100 percent solids, high modulus, structural epoxy gel. It is a solvent free, low odor high strength, moisture insensitive, non-sag epoxy system. The resin and hardener are uniformly dispensed from a dual cartridge system and mixed simultaneously through a mixing nozzle or available in bulk. Long working time with a full cure in 24 hours. Moisture insensitive, may be used in damp environments, concrete, hollow block, brick, clay and stone. Ideal for vertical, horizontal, and screen applications. Structural bonding of concrete to concrete. Meets ASTM C881-14: Type I, II, IV and V, Grade 3, Class B and C. Cartridges with Nozzle. Use for anchoring and doweling. Long working time with a quick cure time. Moisture insensitive, can be used in underwater environments, concrete, hollow block, brick, clay and stone. Ideal for vertical, horizontal, and screen applications, seismic anchoring and bracing, surface crack repair. Ultra high-strength epoxy mixes through a static mixing tube and can also be resealed which means that any remaining material can be saved for later use. Cartridge w/nozzle.
Marshall JP36 Adjustable Extend-O-Post Jackpost Acorn NSR3418 Round Nail Stake Marshall JP55 Adjustable Extend-O-Post Jackpost
Use for supporting sagging floors, weak beams and warping stairways. 2-1/4" x 15 gauge prime steel inner tubing. 2-1/2" x 15 gauge prime steel outer tubing. 2-1/4" steel collar. 1" x 6" steel screw. Two 4" x 4" x 10 gauge steel plates. 7" turning handle. Grooved pin and plain pin. Flow coated with red corrosion-resistant paint. Packed with instructions. UPC symbol on carton. Maximum load capacity obtained at lowest extension. Used for securing wood and metal forms to the ground in all flatwork applications, for attaching screed bard holder clamps, for securing landscape timbers, surveying stakes, string line guides, etc. Use for supporting sagging floors, weak beams and warping stairways. 2-1/4" x 15 gauge prime steel inner tubing. 2-1/2" x 15 gauge prime steel outer tubing. 2-1/4" steel collar. 1" x 6" steel screw. Two 4" x 4" x 10 gauge steel plates. 7" turning handle. Grooved pin and plain pin. Flow coated with red corrosion-resistant paint. Packed with instructions. UPC symbol on carton. Maximum load capacity obtained at lowest extension.
Acorn BC214 Rod Chair Marshalltown TWR19 Tie Wire Reel Acorn BT174-5M Bar Tie
Support rebar in concrete slabs and foundations. Designed to fit both 3/8" and 1/2" rebar. Flat base design adds to stability of reinforcing while pouring concrete. Bag of 500. Constructed of light weight aluminum. Designed for left or right hand use. Large knob provides smooth operation. Accommodates all types of tie wire rolls. Fits any standard size belt. Used to secure the position of rebar during concrete pouring.
National Nail 1/2X6 Pre-Formed Anchor Bolt Acorn NSR3424 Round Nail Stake Acorn BT175-5M Bar Tie
Pre-formed bolt designed for anchoring to concrete in all construction work. Hold securely and permanently because of the angle design. Designed for all types of anchoring to poured concrete. Used for securing wood and metal forms to the ground in all flatwork applications, for attaching screed bard holder clamps, for securing landscape timbers, surveying stakes, string line guides, etc. Used to secure the position of rebar during concrete pouring.
Vestal CL-2416 Foundation Access Door FORM CONCRETE FOOT PLASTC 32IN Vestal CL-3216 Foundation Access Door
Heavy gauge steel, all welded construction. Built-in lintel attached. Positive latch made to accept padlock. Door size is stenciled on each door. Primed with black corrosion resistant paint. Made in USA. Fastest, easiest way to form concrete footings; patented square footing form decreases cycle time, labor and material cost; can be sized, attached to construction tube, placed in excavated hole and backfilled. Can be used with rebar to reinforce footing or column if needed. Heavy gauge steel, all welded construction. Built-in lintel attached. Positive latch made to accept padlock. Door size is stenciled on each door. Primed with black corrosion resistant paint. Made in USA.
   
 
1 2 3