Home > FASTENERS > CHAIN, CABLE, ROPE > CHAIN / ACCESSORIES
Choose a sub category:
CHAIN - PROOF COIL CHAIN - HIGH TEST CHAIN - STRAIGHT LINK
CHAIN - TWIST LINK CHAIN - JACK CHAIN - TWIN LOOP
CHAIN - SASH CHAIN - DECORATIVE CHAIN - PLASTIC
CHAIN - SPECIALTY GRAB HOOKS SLIP HOOKS
SHACKLES CHAIN - COLD SHUTS CHAIN - LAP LINKS
CHAIN - QUICK LINKS CHAIN - SNAP LINKS CHAIN - SWIVELS
CHAIN - CLEVIS LINKS SPECIALTY FARM HITCH PINS
ANCHOR SHACKLES CLEVISES & PINS SNAPS
WELDED RINGS CHAIN HOISTS LOAD BINDERS
POWER HOISTS ROLLER CHAINS & PARTS
Sort By:
1 2 3 ... 22
Speeco 07090100/2702 Standard Tractor Lynch Pin Speeco 07091900/3548 Standard Tractor Lynch Pin SHUT COLD ZINC PLATED 3/16IN
Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust. Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust. Designed as a temporary chain link repair, use one size bigger than chain. Can be used to couple chain attachments. Do not reuse after closure. Manufactured from steel.
Speeco 07090400/2704 Standard Tractor Lynch Pin Campbell T7665012 Welded Ring Campbell T5950124 Repair Lap Link
Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust. Campbell Welded Ring, 1 in Length X 0.18 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity For connections of chain and attachments (Not for overhead lifting). WARNING: DO NOT exceed working load limit.
QUICK LINK ZN 3/16            Fehr Bros 3/16 Anchor Shackle SPRING SNAP STEEL ZN 3/16
Factory number indicated thickness (inches). Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting. WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device.
Fehr Bros 1/4IN Anchor Shackle Speeco 07090800/2698 Tractor Lynch Pin Speeco 07091500/2709 Standard Tractor Lynch Pin
Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting. Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust. Forged carbon steel for maximum strength. Spring steel snap rings. Zinc plated to resist rust.
Campbell T4900324 Cold Shut Campbell T4900424 Cold Shut Campbell T7665032 Welded Ring
Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. Campbell Welded Ring, NO 7 Chain, 1-1/4 in Length X 0.18 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity
Baron 1407 Open Eye Spring Snap National Hardware 3156BC Ring BREACHING SNAP ZN 2-1/2
RINGS 1IN SLD BRS
Our Price: $1.08
Baron Spring Snap, Open Eye, 9/32 in Snap Opening, 3-3/8 in Overall Length, Steel, Nickel Plated National Hardware Ring, Series: 3156BC, 1 in, Solid Brass, 195 lb Load Capacity, For Rope, Chain and Strap .
Campbell T7661152 Welded Ring Midland Big Orange 081163/MC645G Anchor Shackle Fehr Bros 5/16 Anchor Shackle
Campbell Welded Ring, NO 3 Chain, 2 in Length X 0.24 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity Meets requirements of Federal Specification RR-C-271D Amendment 1. Shackle pins are forged from alloy steel, heat treated and tempered to give greater strength. Galvanized per ASTM A153. Design factor 5:1 Forged steel, hot dipped, galvanized. Open-throat design, wide bow, screw pin shackle requires no tools to assemble. Slip screwdriver blade or hand punch through pin/eye and tighten. Meets Federal Specification RR-C-271F, type IV, Class 2.  WARNING: Inspect regularly. Replace if worn, distorted or damaged. Ensure pin is fully engaged. Seize pin with wire. Do not exceed WLL [Work Load Limit].Use only Duty Rated Shackles, with embossed WLL,for overhead lifting.
Campbell T7660841 Welded Ring Campbell T4900524 Cold Shut Campbell T7665042 Welded Ring
Campbell Welded Ring, NO 4 Chain, 1-1/4 in Length X 0.22 in Wire Size, Steel, Zinc Plated, 200 lb Load Capacity Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting. Campbell Welded Ring, NO 3 Chain, 1-1/2 in Length X 0.24 in Wire Size, Steel, Nickel Plated, 200 lb Load Capacity
National Hardware 3156BC Ring Speeco 07094000/00266 Round Loop PTO Locking Pin Speeco 07093900/00276 Square Loop PTO Locking Pin
RINGS 1-1/8IN SLD BRS
Our Price: $1.20
National Hardware Ring, Series: 3156BC, 1-1/8 in, Solid Brass, 215 lb Load Capacity, For Rope, Chain and Strap Numerous farm, lawn, and garden and industrial applications. 2-1/4 usable inches, zinc-plated.
SNAP SPRG INTRLK ZN 1/4X2IN   Baron 2450-1/4 Snap Link Campbell T4900624 Cold Shut
Designed for lifting, pulling, mooring and other farm, marine, and recreational applications. For quick attachment. Steel Body and spring. WARNING: DO NOT EXCEED the working load limit. DO NOT USE for overhead lifting, to support human weight, for playground or athletic equipment, or as safety device. Connections for chain and attachments. When using cold shuts with chain, use one size larger than chain size. With a hammer, drive the open end through the cold shut eye then peen the extended end to prevent opening. Note: Cold shuts should not be reused after closure has been made. Do not use for overhead lifting.
   
 
1 2 3 ... 22