Home > POWER TOOLS & ACC > POWER TOOLS > HAND POWER TOOLS > FLOOR SANDING EQUIPMENT

Affordable Sanding Equipment

Beautiful hardwood floors are the pride and joy of many home-owners. With the amount of foot traffic our floors endure on a daily basis, it comes as no surprise that they require regular attention and upkeep to keep them looking as good as new. To achieve professional-quality results, you must start with the proper wood floor refinishing equipment to get the job done right. At Guy’s Hardware, you can find the right variety of sanding accessories to get the job done accurately every time, such as 40 grit sandpaper sanding discs.

Sanding pads and discs and floor sander sheets and pads all perform different functions, so having the right 20 and 36 grit sandpaper sheets, for example, can make all the difference when aiming for professional-looking results. No matter what your sanding project might be, from home repair to professional carpentry, Guy’s Hardware stocks all the sanding accessories you’ll need to handle every job.

Sort By:
1
Essex Silver Line 7516D80 Sanding Disc Essex Silver Line 7516D36 Sanding Disc Essex Silver Line 7516D100 Sanding Disc
For removing old surface coatings and leveling uneven floors use 20 or 36 grit. For intermediate sanding of floors following rough sanding use 40 grit. For initial sanding of moderately worn floors use 60 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 80 or 100 grit. For removing old surface coatings and leveling uneven floors use 20 or 36 grit. For intermediate sanding of floors following rough sanding use 40 grit. For initial sanding of moderately worn floors use 60 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 80 or 100 grit. For removing old surface coatings and leveling uneven floors use 20 or 36 grit. For intermediate sanding of floors following rough sanding use 40 grit. For initial sanding of moderately worn floors use 60 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 80 or 100 grit.
Essex Silver Line 7516D60 Sanding Disc Essex Silver Line 1218THKW Floor Stripping Pad 12 in L x 18 in W Essex Silver Line 1218THKB Floor Stripping Pad 12 in L x 18 in W
For removing old surface coatings and leveling uneven floors use 20 or 36 grit. For intermediate sanding of floors following rough sanding use 40 grit. For initial sanding of moderately worn floors use 60 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 80 or 100 grit. For high gloss polishing where highest luster is desired. Use with sandscreen. For heavy duty wet stripping of floors.
Essex Silver Line 1218THKG Floor Stripping Pad 12 in L x 18 in W Essex Silver Line 80SL8V Sandpaper with Hook and Loop Attachment Essex Silver Line 36SL8V Sandpaper with Hook and Loop Attachment
For general duty scrubbing and spot removal on floors. For removing old surface coatings and leveling uneven floors use 20 grit. For intermediate sanding of floors following rough sanding use 36 grit. For intermediate sanding of floors following rough sanding or initial sanding of moderately worn floors use 40 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 60, 80 or 100 grit. For removing old surface coatings and leveling uneven floors use 20 grit. For intermediate sanding of floors following rough sanding use 36 grit. For intermediate sanding of floors following rough sanding or initial sanding of moderately worn floors use 40 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 60, 80 or 100 grit.
Essex Silver Line 7516D40 Sanding Disc Essex Silver Line 17SC150 Screen-Bak Sanding Disc Essex Silver Line 1218100 Sandpaper
For removing old surface coatings and leveling uneven floors use 20 or 36 grit. For intermediate sanding of floors following rough sanding use 40 grit. For initial sanding of moderately worn floors use 60 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 80 or 100 grit. For removing fine scratch marks prior to applying new coatings or light sanding between surface coatings. 20 Grit: For removing old surface coatings and leveling uneven floors. 36 Grit: For intermediate sanding of floors following rough sanding. For initial sanding of moderately worn floors. 60, 100 Grit: For finish sanding of all floors prior to applying new coatings. For light sanding between surface coatings.
Screenbak 1218SC150 Sandpaper Essex Silver Line 7516D20 Sanding Disc Essex Silver Line 17SC100 Screen-Bak Sanding Disc
For removing fine scratch marks prior to applying new coatings. For light sanding between surface coatings. Rental. For removing old surface coatings and leveling uneven floors use 20 or 36 grit. For intermediate sanding of floors following rough sanding use 40 grit. For initial sanding of moderately worn floors use 60 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 80 or 100 grit. For removing fine scratch marks prior to applying new coatings or light sanding between surface coatings.
Essex Silver Line 121860 Sandpaper Essex Silver Line 17SC80 Screen-Bak Sanding Disc Screenbak 1218SC80 Sandpaper
20 Grit: For removing old surface coatings and leveling uneven floors. 36 Grit: For intermediate sanding of floors following rough sanding. For initial sanding of moderately worn floors. 60, 100 Grit: For finish sanding of all floors prior to applying new coatings. For light sanding between surface coatings. For removing fine scratch marks prior to applying new coatings or light sanding between surface coatings. For removing fine scratch marks prior to applying new coatings. For light sanding between surface coatings. Rental.
Essex Silver Line 121836 Sandpaper Essex Silver Line 121820 Sandpaper Essex Silver Line SL8 Velcro Sheet
20 Grit: For removing old surface coatings and leveling uneven floors. 36 Grit: For intermediate sanding of floors following rough sanding. For initial sanding of moderately worn floors. 60, 100 Grit: For finish sanding of all floors prior to applying new coatings. For light sanding between surface coatings. 20 Grit: For removing old surface coatings and leveling uneven floors. 36 Grit: For intermediate sanding of floors following rough sanding. For initial sanding of moderately worn floors. 60, 100 Grit: For finish sanding of all floors prior to applying new coatings. For light sanding between surface coatings. For removing old surface coatings and leveling uneven floors use 20 grit. For intermediate sanding of floors following rough sanding use 36 grit. For intermediate sanding of floors following rough sanding or initial sanding of moderately worn floors use 40 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 60, 80 or 100 grit.
Essex Silver Line SL8 Velcro Sheet Essex Silver Line SL8 Velcro Sheet Essex Silver Line SL8 Velcro Sheet
For removing old surface coatings and leveling uneven floors use 20 grit. For intermediate sanding of floors following rough sanding use 36 grit. For intermediate sanding of floors following rough sanding or initial sanding of moderately worn floors use 40 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 60, 80 or 100 grit. For removing old surface coatings and leveling uneven floors use 20 grit. For intermediate sanding of floors following rough sanding use 36 grit. For intermediate sanding of floors following rough sanding or initial sanding of moderately worn floors use 40 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 60, 80 or 100 grit. For removing old surface coatings and leveling uneven floors use 20 grit. For intermediate sanding of floors following rough sanding use 36 grit. For intermediate sanding of floors following rough sanding or initial sanding of moderately worn floors use 40 grit. For finish sanding of all floors prior to applying new coatings or light sanding between surface coatings use 60, 80 or 100 grit.
Essex Silver Line SL-7 Corded Floor Edger with Hook and Loop Essex Silver Line SL-1218R Corded Floor Polisher Essex Silver Line SL-8V Line Floor Corded Sander with Hook and Loop
Oversized vacuum fan and chamber work together to achieve superior dust pick up. Light helps brighten dark corners and closets. Takes 7" x 5/16" standard paper attached with bolt and washer. Specs: accurately machined interchangeable parts of highly polished aluminum alloys, 1.5 hp motor with easy access brushes, 7" rubber filled disc runs at 3600 RPM with a free-wheeling non marking disc guard. All ball bearings are lubricated and sealed. 10" diameter, 13" H, and weighs 30 lbs. Includes 25' power cord with twist lock connectors and standard plug, dust bac and wrench. Orbital floor polisher has a 1hp, cast aluminum base with weight built into the chassis for low center of gravity, sealed Baldor motor protected from dust, fan cooled, thermal overload on motor, heavy duty rubber towers in four corners support the base and plate protecting the motor shaft and allowing for easier operation. Larger (5/8") orbital action, armature has a 50lb pre-load to absorb shock and start easier. NOTE: 12"x18" Essex Silver line 1218thkw thick white pad (550.9948) MUST be used with this item to ensure proper use and outcomes. Can be used for sanding, polishing, waxing, recoating on decks, floors and tile. Constant speed motor and soft rubber drum with unique Hook & Loop system. The slow constant speed of the drum and tilt action allows for more controlled and even sanding. Specs: 1.5 HP capacitor motor, 115 volt, AC only, 60 Cycle, single phase, runs on 11 amps. Drum - standard 8" width, high density foam rubber cover on aluminum core with Hook & Loop cover, takes 8x17-5/8" paper, drum speed - 1800 RPM, (constant speed), dimensions 28"Lx15"Wx34"H, weighs 115 lbs. Includes: 25 ft. power cord with twist lock connectors and standard plug, dust bag and wrenches.
   
 
1